<1> Outline

       Smith5016 high temperature flow meter is a rotor-type PD measurement instruments, consisted of  Shell measurement, measurement rotor, transmission parts, and other components. It's different with the ordinary flow meter ,  the medium can only contact with the rotor , all medium transmission components are isolated by medium ,measurement rotor is made of high-strength materials, even the medium on the  high-speed solid state or steam purge Instrument parts will be not damaged. It is used for these occasion: keep warm non-continuous, frequent operation, medium containing impurities, room temperature curing, easy crystals and can not be precisely control the temperature . It has wide range, excellent accuracy, small pressure loss, viscosity strong adaptability and high viscosity liquids capable of measuring temperature calibration convenient, simple to install, and other advantages. Mainly used in  crude oil, chemicals, chemical fiber, traffic, commerce, food, medicine and health care, scientific research and military industries in the asphalt, fuel oil, crude oil, room temperature curing, easy crystals, sticky substances, such as ultra-high acid, alkali and salt, oil, nature and the need to water the outside temperature at room temperature curing of precision measurement.
Smith5016 high temperature  flow meter can be directing the cumulative flow, instantaneous flow, a single flow, and so on, can also be output pulse signal, 4-20mA, or 1-5 V analog signals 4-20mA + HART, MODBUS, communications support 232,485 etc.. Combined with Smith  mechanical controller or electronic controller, it can achive different types of filling, control, and other functions approved. Flow meter has common type and insulation folder type.

<2>Features 

Flow meter used waterproof treatment-resistant products impurities ability, and short transmission chain, is anxious reliable high precision and stability. Products small size, light weight, and is particularly applicable to factories, wharves, ships, removal and demolition of the more troublesome areas.
Flow meter site can show that the cumulative flow, instantaneous flow, a single flow.
Flow meter implementation of the standards: NIST (USA technical standards for professional standards) JB/T9242-1999 "volumetric flow meter GM technical conditions"

<3>Technology Indicators

Accuracy:     0.1%、 0.2%、 0.5% 

Nominal Path DN (mm):    4 ~ 300 

Nominal pressure PN (M. Pa): Stainless steel: 1.0、 1.6、2.5、4.0、6.3

                               Carbon Steel: 2.5、4.0、 6.3、 9.6

Measured the temperature of the liquid: Low Temperature: -40℃ ~+60℃

Normal temperature :-30℃ ~ +80℃ Temperature:-+60℃~+200℃ 

High temperature +100℃~+300℃

Tested the liquid viscosity(mPa.s): 0.3 ~ 350,000 

Pipeline Connection: GB/T9118-2000 (China flange); NIST (USA standard flange); BSPT (British Standard Pipe Thread); NPT (the United States pushed and pulled out thread);

NPT (the United States pushed and pulled out thread); 

Field Show: 999999999(cumulative flow)   99999999.9 (single flow) 

9999999.9(instantaneous flow) 

Output signal:  pulse signals、 4 ~20mA、 1-5V、 + 4 ~ 20mA HART agreement, MODBUS Support RS232、 RS485 communications (optional) 

Ex Rating:       ExdIIBT5 ExiaIICT5 

Protection Level:    IP65, IP67